Logo UdGUdG - DUGiDocs - Mòbil

Català English Español

Management of corn stalk waste as reinforcement for polypropylene injection moulded composites

Mostra el registre parcial de l'element

dc.contributor.author Flandez, Jirleska
dc.contributor.author González Tovar, Israel
dc.contributor.author Bayer Resplandis, Jordi
dc.contributor.author El Mansouri, Nour-Eddine
dc.contributor.author Vilaseca Morera, Fabiola
dc.contributor.author Mutjé Pujol, Pere
dc.date.issued 2012
dc.identifier.issn 1930-2126
dc.identifier.uri http://hdl.handle.net/10256/7630
dc.description.abstract The main objective of this study was the management of corn stalk waste as reinforcement for polypropylene (PP) injection moulded composites as an alternative to wood flour and fibers. In the first step, corn stalk waste was subjected to various treatments, and four different corn stalk derivatives (flour and fibers) able to be used as reinforcement of composite materials were prepared and characterized. These derivatives are corn stalk flour, thermo-mechanical, semi-chemical, and chemical fibers. They were characterized in terms of their yield, lignin content, Kappa number, fiber length/diameter ratio, fines, coarseness, viscosity, and the length at the break of a standard sheet of paper. Results showed that the corn stalk derivatives have different physico-chemical properties. In the second step, the prepared flour and fibers were explored as a reinforcing element for PP composites. Coupled and non-coupled PP composites were prepared and tested for tensile properties. For overall trend, with the addition of a coupling agent, tensile properties of composites significantly improved, as compared with non-coupled samples. In addition, a morphological study revealed the positive effect of the coupling agent on the interfacial bonding. The composites prepared with semichemical fiber gave better results in comparison with the rest of the corn stalk derivatives due to its chemical characteristics cat
dc.format.mimetype application/pdf cat
dc.language.iso eng cat
dc.publisher North Carolina State University cat
dc.relation.ispartof © BioResources, 2012, vol. 7, núm. 2, p. 1836-1849 cat
dc.relation.ispartofseries Articles publicats (D-EQATA) cat
dc.rights Tots els drets reservats cat
dc.subject Blat de moro -- Propietats mecàniques cat
dc.subject Corn -- Mechanical properties cat
dc.subject Polipropilè cat
dc.subject Polypropylene cat
dc.subject Fibres naturals cat
dc.subject Natural fibers cat
dc.subject Composite materials -- Mechanical properties
dc.subject Materials compostos -- Propietats mecàniques
dc.title Management of corn stalk waste as reinforcement for polypropylene injection moulded composites cat
dc.type info:eu-repo/semantics/article cat
dc.rights.accessRights info:eu-repo/semantics/openAccess
dc.embargo.terms Cap cat
dc.type.version info:eu-repo/semantics/publishedVersion cat

Text complet d'aquest document

Aquest element apareix en la col·lecció o col·leccions següent(s)

Mostra el registre parcial de l'element

Drets: Tots els drets reservats

Documents relacionats per matèria


Biblioteca UdG © 2012